Konica Minolta bizhub C451 User Manual page 412

Copy paper/original documents
4
Touch [Standard Size].
The Standard Size screen appears.
5
Touch [↓] twice, and then touch [A6Cardw].
– Touch [↑] and [↓] until the button for the desired paper size is dis-
played.
– If "A6Cardw" is selected, "Thick 3" is automatically selected. If pa-
per other than postcards are loaded, change the paper type setting.
For details on the paper type settings, refer to "Specifying a setting
for special paper" on page 6-21.
6
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
The paper size for the bypass tray is set.
Reminder
If paper other than the specified paper size is loaded, a paper misfeed
may occur since the paper size is not automatically detected.
C451
6
6-12