Konica Minolta bizhub C451 User Manual page 530

Hide thumbs Also See for bizhub C451:

Table of Contents

Application functions

Select the printing position, and then touch [OK].

As the factory default, "Bottom" is selected.

To make fine adjustments to the printing position, touch [Adjust Po-

sition]. Select the desired direction under "Left & Right Adjustment"

or "Top & Bottom Adjustment", use the keypad or touch [–] and [+]

to specify the adjustment setting, and then touch [OK].

What are the limits on the adjustment amount?

% The print position can be finely adjusted in 0.1 mm increments.

Can no adjustment be made?

% To make no left/right or up/down adjustments, touch [No Adjust-

What happens when a value outside of the allowable range is spec-

% The message "Input error" appears. If "Input error" appears or if the

adjustment value was incorrectly entered, touch [No Adjustment] or

press the [C] (clear) key, and then specify the correct value.

Troubleshooting