Separating Copies By Sets ("Sort" Setting) - Konica Minolta bizhub C451 User Manual

Basic copy operations

Separating copies by sets ("Sort" setting)

0 As the factory default, "Group" is selected.
0 If finisher FS-519 is installed, the output tray can be selected. For details,
refer to "Selecting the output tray" on page 2-86.
0 If offset sorting is selected while no finisher or separator is installed, print-
ed copies will be fed out and sorted in an alternating w and v pattern if
the following conditions are met.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" set-
ting is selected.
If offset sorting is selected while a finisher or a separator is installed,
printed copies are fed out and stacked on top of each other with each set
shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
C451
2
2-84