Konica Minolta bizhub C451 User Manual page 695

Utility mode
Parameter
Gradation
Adjust-
ment
Line De-
tection
Trail Edge Adjust
*1
Appears when finisher FS-608 is installed.
*2
Appears when finisher FS-608 or finisher FS-517 is installed.
*3
Appears when finisher FS-519 is installed with the saddle stitcher at-
tached.
*4
Appears when finisher FS-519 is installed.
*2 *4
Appears when finisher is installed with punch kit.
C451
Description
Image Stabili- When adjusting the gradation levels, first
zation Only press the [Start] key to perform image
stabilization.
Copy Adjust the gradation levels if there are
changes in the color gradations of the
print image. The adjustment is made
with stress on increasing the number of
images stored in the memory.
Printer (Grada- Adjust the gradation levels if there are
tion) changes in the color gradations of the
print image. The adjustment is made
with stress on the gradations in images.
Printer (Resolu- Adjust the gradation levels if there are
tion) changes in the color gradations of the
print image. The adjustment is made
with stress on the reproducibility of text
and lines.
Prior Detection Select whether or not a warning appears
Setting when the left partition glass is dirty, and
specify the dirt detection level. The dirt
detection operation is performed before
and after scanning a document using the
ADF.
Detection While Specify the level at which dirt is detected
Feeding Setting when scanning a document using the
ADF.
• Do not remove:
The operation to remove lines is not
performed.
• Remove:
The operation to remove lines is per-
formed.
Adjust shifting if it can be seen at the
trailing edge of the print result.
11
Default Setting
-
-
-
-
Yes
Warning Display:
TYPE 2
Detection Level:
Std.
1
-
11-38