Konica Minolta bizhub C451 User Manual page 615

Replacing toner cartridges and staple cartridges and emptying punch scrap box
3
Remove the empty car-
tridge from the staple
cartridge holder.
4
Load the new staple car-
tridge into the staple car-
tridge holder.
– Do not remove the
remaining staples,
otherwise the ma-
chine will not be able
to staple after the
cartridge is replaced.
5
Insert the staple car-
tridge holder along the
rails in the compartment
until it snaps into place.
– Check that the staple
cartridge holder is
securely installed.
6
Close the front door.
C451
8
8-48