Konica Minolta bizhub C451 User Manual page 522

Application functions
3
Touch the button for the desired position to be erased.
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Frame Erase" function, touch [No].
What happens when [Frame] is selected?
?
% The same width is erased on all four sides of the original. The fac-
tory default setting is "Frame".
Can the settings be combined?
?
% "Frame" cannot be combined with the other settings ("Top", "Left",
"Right" or "Bottom").
4
Touch [-], [+] or [None] to specify the width to be erased.
– To specify a different width to be erased depending on the position,
specify different settings for "Top", "Left", "Right", and "Bottom".
– When using the keypad to specify the settings, press the [C] (clear)
key to erase the value, and then type in the setting.
What happens when a value outside of the allowable range is spec-
?
ified?
% The message "Input error" appears. If "Input error" appears or if the
erased width was incorrectly entered, press the [C] (clear) key in the
keypad, and then specify the correct value.
5
Touch [OK].
6
Specify any other desired copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.
C451
7
7-93