Konica Minolta bizhub C451 User Manual page 193

Basic copy operations
Setting
Offset
Fold/Bind
Center Staple/Fold
Output Tray
C451
Description
If no finisher or separator is installed
If the sorting conditions are met, printed copies are fed out and
sorted in an alternating crisscross pattern.
1
1
1
4
3
2
If a finisher or separator is installed
The copies are fed out and stacked on top of each other with
each set shifted to separate it.
1
4
3
2
Select one of these settings to fold copies. The copies can also
be bound with staples at the same time.
A Fold/Bind setting can be used if optional finisher FS-608 is in-
stalled.
Select this setting to fold copies. The copies can also be bound
with staples at the same time.
The "Center Staple & Fold" setting can be used if the saddle
stitcher is installed on optional finisher FS-519.
Select the output tray where the finished copies are to be fed.
4
2
3
1
1
1
1 1
1 4
3
1 2
1
1
1
1 1
2
2-81