Utility mode
11.11 Header/Footer Settings
Follow the procedures described below to specify headers/footers used with
the Stamp/Composition functions available from the Application tab.
Specifying headers/footers
1
Display the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-56.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [Forward→], and then touch [2 Stamp Settings].
The Stamp Settings screen appears.
4
Touch [1 Header/Footer Settings].
The Header/Footer Settings screen appears.
C451
11
11-99