Copy paper/originals
6.1.6
Auto tray switch feature
If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded
with paper meeting the following conditions, the other paper tray is automatically selected so printing can
continue. If the optional LCT is installed, a maximum of 3,650 copies (with A4 v paper) can be made
continuously. (The paper tray is automatically switched only if the "Auto Tray Switch ON/OFF" parameter in
the Utility mode is set to "Allow".)
Operating conditions
-
The paper is the same size.
-
The paper is positioned in the same orientation.
-
The paper is the same type.
-
The paper trays are selected when the paper tray is automatically switched.
!
Detail
For details on the specifying the paper trays that are selected when the paper tray is automatically
switched, refer to
6.1.7
Order for selecting paper trays
As a factory default, when a different paper tray is automatically selected, the next paper tray in the following
list is chosen.
Tray 1 → Tray 2 → Tray 3
*1
Appears only when the optional paper feed cabinet is installed.
*2
Appears only when the optional LCT is installed.
!
Detail
To change the order in which the paper trays are selected, refer to
C353/C253/C203
"System Settings" on page
*1
→ Tray 4
*1
→ LCT
*2
→ Bypass tray
11-22.
"System Settings" on page
6
11-22.
6-5