Feeding The Document; Loading The Document Into The Adf - Konica Minolta bizhub C451 User Manual

Hide thumbs Also See for bizhub C451:

Table of Contents

Basic copy operations

Feeding the document

The document can be fed in either of the following two ways. Be sure to po-

sition the document correctly according to the type of document being cop-

Document Feed Method

Using the ADF

Using the original glass

0 Do not load documents that are bound together, for example, with paper

clips or staples.

0 For details on the types of documents that can be loaded into the ADF,

refer to "Original documents" on page 6-26.

0 Do not load more than 100 sheets or so many sheets that the top of the

stack is higher than the ▼ mark, otherwise a document misfeed or dam-

age to the document or machine may occur. However, a document that

exceeds 100 pages can be scanned in separate batches. For details, re-

fer to "Scanning the document in separate batches ("Separate Scan" set-

ting)" on page 2-13.

0 If the document is not loaded correctly, it may not be fed in straight or a

document misfeed or damage to the document may occur.

0 If the document is loaded in any orientation other than with the top of the

document toward the back of the machine, be sure to select the docu-

ment orientation. For details on selecting the document orientation, refer

to "Selecting the document orientation (Original Direction settings)" on

By using the ADF, a multi-page document can be fed automatically,

one page at a time. This feed method can also be used to automat-

ically scan double-sided documents.

Place the document directly on the original glass so that it can be

scanned. This method is best with books and other documents that

cannot be fed through the ADF.