Konica Minolta bizhub C451 User Manual page 735

Utility mode
5
Touch [Half-Fold Position].
The Half-Fold Position screen appears.
6
Touch the button for the paper size to be adjusted.
– If the paper size to be adjusted is not displayed, touch [↑] and [↓]
until the desired paper size is displayed.
– If the saddle stitcher is installed on optional finisher FS-519, touch
buttons for the paper size and for the paper type.
7
Compare the width of the left pages of the copy sample with the width
of the right pages to check for the center of the paper.
– If the folding position is too far to the left of the center of the paper,
touch [+] to increase the adjustment.
C451
Finisher FS-608
Finisher FS-519 + Saddle stitcher
11
11-78