Konica Minolta bizhub C451 User Manual page 420

Copy paper/original documents
5
Select the size of the paper to be loaded.
– Touch [↑] and [↓] until the button for the desired paper size is dis-
played.
– If tray 1 or 2 is set for wide paper, the size cannot be changed.
6
To change the size, touch [Change Size].
The Change Size screen for oversized paper appears.
7
Specify the X and Y sides of the paper, and then touch [OK].
– Touch either [X] or [Y], press the [C] (clear) key to clear the current
setting, and then use the keypad to type in the size.
– To store a paper size of 12 × 18 w (304.8 mm × 457.2 mm), touch
[12 × 18 w]. Enter values for "X" and "Y".
– If a value outside the allowable range is specified, the message "In-
put error" appears. Type a value within the allowable range. The al-
lowable range differs depending on the paper sizes.
– If the orientation of the loaded paper does not match the sizes
specified for "X" and "Y", "Input error" appears, even if the values
are within the allowable range. In addition, do not enter the same
size for "X" and "Y".
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
C451
6
6-20