Utility mode
–
If the lines are shifted in the X direction as shown below, touch [+]
under "X" to increase the adjustment (between 1 dot and 6 dots).
–
If the lines are shifted in the Y direction as shown below, touch [-]
under "Y" to reduce the adjustment (between -1 dot and -6 dots).
–
If the lines are shifted in the Y direction as shown below, touch [+]
under "Y" to increase the adjustment (between 1 dot and 6 dots).
–
If the lines are not shifted from the reference lines, continue with
step 10.
C451
11
11-94