Auto Tray Switch Feature; Order For Selecting The Paper Trays - Konica Minolta bizhub C250 User Manual

Copy operations

Hide thumbs Also See for bizhub C250:

Table of Contents

Auto tray switch feature

If the selected paper tray runs out of paper while a job is being printed and a

different paper tray is loaded with paper meeting the following conditions,

the other paper tray is automatically selected so printing can continue. If the

optional LCT is installed, a maximum of 3,400 copies (with 8-1/2 × 11 v pa-

per) can be made continuously. (The paper tray is automatically switched

only if the "Auto Tray Switch ON/OFF" parameter in the Utility mode is set to

Operating Conditions

- The paper is the same size.

- The paper is positioned in the same orientation.

- The paper is the same type.

- Paper trays that are selected when the paper tray is automatically

For details on the specifying the paper trays that are selected when the

paper tray is automatically switched, refer to "System setting" on

As a factory default, when a different paper tray is automatically selected, the

next paper tray in the following list is chosen.

2nd tray → 3rd tray → 4th tray → 1st tray

To change the order in which the paper trays are selected, refer to "Sys-

tem setting" on page 12-17.

Copy paper/original documents

Show Quick Links

Table of Contents