Konica Minolta bizhub C451 User Manual page 750

Utility mode
6
Load the paper into the bypass tray.
7
Press the [Start] key.
A test pattern is printed.
8
Check the distance from the reference black lines to the cyan lines in
the test pattern along the X and Y directions.
– If the lines are shifted in the X direction as shown below, touch [-]
under "X" to reduce the adjustment (between -1 dot and -6 dots).
– Each time [+] or [-] is touched, the value is increased or decreased
by one increment.
C451
Y
X
11
11-93