Additional copy operations
3.5
Registering copy programs (Mode Memory)
Frequently used copy settings can be stored together as a program to easily
be recalled. A maximum of 30 programs can be registered.
A name of up to 16 characters can be specified for the registered copy pro-
grams.
1
Using the touch panel and control panel keys, specify the copy settings
to be registered in the copy program.
Can the current settings be checked?
?
% To check the currently specified copy settings, touch [Check Job]
in the left panel, and then touch [Job Details]. For details, refer to
"Checking the Copy Settings (Check Job)" on page 3-2.
2
Press the [Mode Memo-
ry] key.
The Recall Copy Pro-
gram screen appears.
3
From the copy program buttons that appear in the screen, touch the
button where you wish to store the copy settings, and then touch [Reg-
ister Program].
–
There are three Recall Copy Program screens. Touch [↑] and [↓] to
display a different screen.
C451
3
3-19