Zgc2 Trim Kit, Grille Panel Frame Adjustment - Monogram ZIF36N RH Custom Options Manual And Installation Instructions

This kit provides optional side trim pieces for the
original grille panel frame to fit 83-1/2" and 84-1/2"
installation heights.
To change grille panel size:
• Determine the installation height by measuring the
• Adjust refrigerator case trim to desired height. See
• Select the side trim pieces for your installation height.
A. Locate original grille panel frame supplied with the
• Remove 8 screws (two on each corner) and "L"
B. Select correct set of side trim pieces (2 sets
• Secure new side trim pieces to original bottom trim.
C. Remove barrel nuts from original side trim pieces (2
• Reinstall the barrel nuts on the new side trim pieces
D. Slide custom panel into front slots.
• Secure the top trim piece to the frame with "L"
18
enclosure from the floor to the underside of soffit.
When there is no soffit, measure to the top of the
adjacent cabinets.
Product Installation.
refrigerator.
brackets as illustrated.
provided).
Barrel
Nuts
each side).
you have selected. Discard original side trim.
brackets and screws.
ZGC2 Trim Kit
Grille panel frame adjustment
E. Mount the assembled panel by dropping into slots on
the case trim.
1-1/2"
min.
gap
Discard
Side Trim
Pieces
Important: Maintain 1-1/2" min. gap between top of door
and bottom of grille panel.