Monogram ZIF36N RH Custom Options Manual And Installation Instructions page 17

36" refrigerators and 36" freezers with custom panel dimensions and trim kit installation instructions
Hide thumbs Also See for ZIF36N RH:
Table of Contents

Advertisement

Step 12
Check door alignment. The top of the door should be
Adjust Door
parallel with the grille panel. If the door appears to be
Alignment
too high or too low on the handle side, adjustments
can be made by turning the hinge.
• To raise the door, turn adjustable hinge pin towards
• To lower the door, turn hinge pin towards the left.
Turn the hinge pin with a 5/16" wrench or, on some
models use the 3/16" Allen wrench taped to the hinge.
Step 13
• Set control at "5".
Set
Temperature
IMPORTANT: Allow 24 hours for temperatures to
Controls
stabilize before making adjustments.
Step 14
• Start the switch to I (on). The green light will come on
Start
Icemaker
• Be sure nothing interferes with the sweep of the feeler
• Discard the first few batches of ice cubes.
• To turn the icemaker off, set the switch to O (off).
Step 15
• A standard toekick is supplied. Install with 2 screws
Install
provided, adjust to desired height and tighten screws.
Toekick
Important: The vented toekick must remain unobstructed
for proper air circulation and operation.
the right.
and the icemaker will begin operation automatically.
arm.
Allow 45 minutes for the icemaker to resume
operation.
Installation
36" Refrigerators, Freezers
Door Should be Parallel
With Grille Panel
Pin Shoulder
Green Power Light
Bushing
D o o r H i n
g e
C a s e H in g
e
Raise
5/16" Wrench
Power Switch
Feeler Arm
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zif36n lhZir36n rhZir36n lh

Table of Contents