Monogram ZIF36N RH Custom Options Manual And Installation Instructions page 8

Custom Door Panel Dimensions Using Standard Trim
Backing
8
1/4" thick panels
or
Panels secured to 1/4" thick backing
35-1/16"
1/4" Thick
Custom Panel
Important: Maximum panel is 50 pounds .
Raised Panel on 1/4" Thick Backing
Using Standard Handles
1/4"
Appearance
Thick
Panel
2" Clearance
handle Side
Custom Panel Dimensions
36" Refrigerators, Freezers
ZIR36N Refrigerator
ZIF36N Freezer
• 1/4" Panel: Cut panels to size.
• Custom handle with 1/4" door panel requires Trim kits
ZKHR1 or ZKHRSS1 for tubular stainless steel handles.
Standard Trim with Panels secured
to 1/4" thick backing
• Applying a raised panel design to a 1/4" thick backing
(screws or glued): Cut 1/4" thick panels to size.
Fabricate the raised panel to permit at least 2"
fingertip clearance of the standard handle. 1-1/4"
clearance from the hinge side to avoid striking
adjacent cabinetry and 5/16" from the top and bottom
edges to allow for the trim flange.
68-7/8"
Note: ZKHTR1 custom handle kit cannot be used in
this configuration.
8"
The grille panel frame is factory assembled for 84"
installation height. If installation height varies, order
ZGC2 trim kit that provides optional side trim pieces.
Cut grille panel to sizes shown below.
Installation Height
83-1/2"
84-1/2"
5/16" Clearance
Raised Panel
1-1/4"
on 1/4" Thick
Clearance
Backing With hinge side
Standard
Handles
5/16" Clearance
5/16" Clearance
Custom Grille Panel
35 1/8"
1/4" Thick Panel
Panel Height
7-1/2"
8-1/2"