Installation At End-Of-Run; Frameless Cabinets; Accessory Panel Kits; Advance Planning Exterior Appearance Options - Monogram ZIF36N RH Custom Options Manual And Installation Instructions

Installation
At End-of-Run
Refrigerator or Freezer
Frameless Side panels, 1/2" minimum thickness are required
Cabinets
when using frameless cabinets. The side panel
acts as a spacer between the cabinet and the
case trim and prevents interference with cabinet
door swing. The leading (front) edge must be
finished to match surrounding cabinetry.
These refrigerators and freezers require field installed
Accessory
door and grille panels.The factory installed trim will
Panel Kits
accept accessory panel kits. White or black Lexan
stainless steel kits are available. Panels are cut to size
and ready to install. These panel kits must be ordered
separately.
ZWBR36, Black Lexan
ZWWR36, White Lexan
ZWSR36, Stainless Steel Panels
These refrigerators and freezers are designed to be
Advance
planning
customized with decorator door and grille panels. Field
exterior
installed custom door and grille panels are required for
appearance
these models.
options
Factory installed trim will accommodate 1/4" thick
custom panels, Lexan
Door and grille panel sizes vary to accommodate the kit
being used. Sizes are provided in this booklet.
Caution: Maximum door panel weight is 50 pounds.
Side panels must be used whenever the sides of the
refrigerator will be exposed. Side panel sizes vary
depending on the installation.
Finished Dim.
Roughed-In Dim.
Refrigerator and Freezer
installed side-by-side
®
Panels
®
Panels
®
or stainless steel panel kits.
Design Information
1/2" Thick
Side Panels
36"
37"
1/2" Thick
Side Panels
Finished Dim.
72"
Rough-In Dim.
73"
1/2" To 3/4" Side Panels. Leading
Edge Flush With Cabinet
A wide range of custom appearance options can be
created with optional trim kits. See page 6 for examples
®
and and trim kit descriptions.
3/4" thick custom panels-Without trim kits
A raised panel design, screwed or glued to a 1/4" thick
backing can be used. See page 8 for panel sizes and
clearances.
You should:
1. Select the appearance option.
2. Order the trim kit for that option.
3. Order the custom door and grille panels from the
cabinet manufacturer. The exact dimension for each
trim kit application is provided in this booklet. Find
and pull out the page for your application and fax or
send it to the cabinet manufacturer. The cabinet
manufacturer must have this information to con-
struct the panels accurately.
4. Determine the final installation situation and order
matching side panels.
36" Refrigerators, Freezers
Refrigerator
Cabinet
Refrigerator door
Cabinet
Note: 1/2" thick side panels shown.
Side panels can be any thickness.
Add side panel thickness to
outside trim width, (36" or 72" for
two models) to calculate the
rough-in dimension. The leading
(front) edge must be finished to
match surrounding cabinetry.
Refrigerator
Cabinet
Refrigerator door
5