Step 8 Install Grille Panel - Monogram ZISB360D Design Manual With Installation Instructions

STEP 8 INSTALL GRILLE PANEL

To insert framed or overlay panel into the grille:
• Raise the grille panel to stop position.
Raise
Loosen
Grille
Side
Panel
Trim
Screw
Adjust Nut Below
Spring to Accomodate
Panel Weight
• Loosen screws on side trim behind frame. Remove
bottom trim.
• Slide panel over the metal backer panel and into
the trim.
• If necessary, tap with a wood block until panel slips
under the top trim piece.
• Reassemble bottom trim. Tighten screws.
• Adjust the hinge spring to accommodate the panel
weight, if necessary.
Installation Instructions
Loosen
Side
Trim
Screw
14