Step 8, Install Grille Panel - Monogram ZIS360N Installation Instructions Manual

Installation Instructions
STEP 8| INSTALL GRILLE PANEL
To insert framed or overlay panel into the grille:
¢ Raise the grille panel to stop position.
<l
=
Raise | [f ze y
crile LY Loosen
Panel |" Side
Screw — 1] _—- Screw
Adjust Nut Below
Spring to Accommodate
Panel Weight
¢ Loosen screws on side trim behind frame. Remove
bottom trim.
¢ Slide panel over the metal backer panel and into
the trim.
¢ If necessary, tap with a wood block until panel slips
under the top trim piece.
¢ Reassemble bottom trim. Tighten screws.
¢ Adjust the hinge spring to accommodate the panel
weight, if necessary.
14