Trim Kit Descriptions - Monogram ZIF36N RH Custom Options Manual And Installation Instructions

Models ZIR36N RH, Refrigerator ZIF36N RH, Freezer
available
36" wide models with handle on left side, the door
swings left to right.
Trim kit ZGC2 - Provides 1/4" grille panel frame side pieces for
descriptions
83-1/2" and 84-1/2" installation heights. The supplied
grille panel frame is factory set for 84".
ZKHR1 - Provides the necessary framework to install a
custom handle, of your choice , onto a 1/4" thick panel.
(Handle not included.)
ZKHRSSI - Tubular stainless steel handle for 1/4" thick
panel installation.
ZKHTR1 - Provides the necessary framework to install a
custom handle, of your choice , onto a 3/4" thick panel.
(Handle not included.) This kit must be used in combi-
nation with ZKTR36LH or ZKTR36RH.
ZKHTRSS1 - Tubular stainless steel handles for 3/4"
thick panel installations. This kit must be used in
combination with ZKTR36LH or ZKTR36RH.
1/4" Panel with standard
handles. No kits required.
3/4" Custom panel with
custom handle. Trim kits
ZKTR36LH (or ZKTR36RH)
and ZKHTR1.
6
Design Information
ZIR36N LH, Refrigerator ZIF36N LH, Freezer
36" wide models with handle on right side, the door
swings right to left.
1/4" Custom panel with 1/4" Custom panel with
custom handles. Trim Kit Tubular Stainless Steel
ZKHR1. handles, Trim Kit
ZKHRSS1.
Install a Refrigerator and
3/4" Custom panel with
Freezer Side by Side with
Tubular Stainless Steel
any of the options shown.
handle, Trim Kits
Use ZFC1 center strip
ZKTR36LH (or ZKTR36RH)
to cover inside case trims.
and ZKHTRSSI.
36" Refrigerators, Freezers
ZKTR36LH (left opening models),
ZKTR36RH (right opening models) - Provides for the
installation of 3/4" thick custom door and grille panels.
This kit provides a standard handle to fit 3/4" thick
panels.
ZUG75 - For side by side installation of two products.
This kit provides for the installation of a unified 3/4"
custom grille panel to span the width of two products.
This kit must be used in combination with ZKTR36LH
and ZKTR36RH.
ZFC1 Trim Kit - For side by side installation of 2
products. This kit provides a trim strip to cover the side
case trim for a finished appearance.
ZWT1 - White toekick (supplied toekick is black).
3/4" Custom panels with
supplied handle. Trim Kit
ZKTR36LH (or ZKTR36RH).
Side by side installation
with 3/4" custom panels
and unified custom grille
panel. Trim Kits ZUG75,
ZKTR36LH, ZKTR36RH.