Side Panels; Zkbfn720Nii Grille Panel Dimensions - Monogram 36” Installation Instructions Manual

Design Guide - Standard Installation

SIDE PANELS

Side panels must be used whenever the sides of the
refrigerator will be exposed. The 1/4" (0.63 cm) side
panels will slip into the side case trim. Secure the
panels to the refrigerator with stick-on hook and loop
fastener strips. Order the side panels from the cabinet
manufacturer.
• Cut a notch in the top front corner as shown to allow
clearance for corner keys in the front side trim.
* Depending on
installation height.
24"
3/16"
1-7/8"
*84"
*3" to 4"
2-9/16"
ZKBFN720NII GRILLE PANEL
DIMENSIONS
The ZKBFN720NII unification kit provides for the
installation of a framed or overlay grille panel.
Framed Panel Dimensions
1/4" (0.63 cm)
Framed Panel 69-7/8" (177.48 cm)
Overlay Panel Dimensions
1/4" (0.63 cm)
Backer Panel 69-7/8" (177.48 cm)
0.10" (0.25 cm) 68-1/2" (97.79 cm)
Spacer Panel
3/4" (1.9 cm) 70-1/8" (178.12 cm)
Overlay Panel
Assemble the overlay panels in the same manner as
the door and drawer panels.
10
A (Width) B (Height)
8-7/8" (22.54 cm)
A (Width) B (Height)
8-7/8" (22.54 cm)
7-5/8" (20 cm)
9" (22.86 cm)
31-1000452 Rev. 1