Step 5
• Install new door handle using original screws.
Install
handles
Step 6
• For shipping purposes, the top case trim is secured at
Adjust
the 84" installation height.
grille
• Loosen 2 screws on both sides of the case trim and
panel height
raise or lower trim to meet soffit height, from 83-1/2" to
84-1/2".
• Tighten all 4 screws.
Important: Maintain 1-1/2" min. gap between top of door
and bottom of grille panel.
Step 7
• Secure the grille panel support to the back side of the
Secure 3/4"
3/4" custom panel with #6 screws.
panel to
• Be sure the lip of the support is over the top of the
grille panel
wood panel.
support
ZKTR36LH/ZKTR36RH Trim Kit
Panel Support
Overlaps Top
3/4" Custom Panel
Top Case Trim
Raise To
Installation
Height
Screws
23