Selecting A Folding Setting; Folding Copies In Half ("Half-Fold" Setting) - Develop ineo+ 451 User Manual

2
2.17

Selecting a folding setting

If options are installed, copies can be folded before being fed out. The following folding settings are available.
The available settings differ depending on the options that are installed.
Setting
Half-Fold
Center Staple &
Fold
Tri-Fold
Note
Copies can be folded in half or in three or bound at the center only if a finisher is installed.

Folding copies in half ("Half-Fold" setting)

When Finisher FS-608 is installed
Paper weight
Plain paper
2
(64 g/m to 90 g/m
Maximum number of folded sheets
3 sheets
2-60
Description
Select this setting to fold copies in half before feeding them out. (Re-
fer to page 2-60.)
Select this setting to staple copies at two places along the center,
then fold the copies in half before feeding them out. (Refer to
page 2-63.)
Select this setting to fold copies in three before feeding them out.
(Refer to page 2-66.)
Paper size
A3 w, B4 w, A4 w, 12-1/4 e 18 w, 11 e 17 w, 8-1/2 e 14 w,
2
) 8-1/2 e 11 w, 8K w
Paper capacity
When folding 3 sheets:
25 sets or less (with a paper length of 299 mm or less)
33 sets or less (others)
Copy Operations
Compatible models
ineo+ 451 ineo+ 550/
650
FS-608 FS-608
FS-519 +
Saddle
Stitcher
FS-608 FS-608
FS-519 +
Saddle
Stitcher
FS-608 FS-608
ineo+ 650/550/451