Using Scan/Fax Programs; Recalling A Scan/Fax Program - Develop ineo+ 451 User Manual

Network Scanner Operations
5 Network Scanner Operations
5.1

Using scan/fax programs

A set of scan settings and recipient information can be registered together as a program. This feature is
convenient for frequently scanning documents and sending data under the same conditions. Follow the
procedure described below to register and recall a Scan/Fax program.
!
Detail
Up to 400 normal programs and 12 temporary programs, which are temporarily available, can be
registered.
If 412 programs have been registered, delete an unnecessary program. For details on deleting
programs, refer to "Editing and deleting scan/fax programs" on page 5-10.

Recalling a scan/fax program

When a Scan/Fax program is recalled, the registered settings can be checked.
1
Press the [Fax/Scan] key in the control panel.
The Fax/Scan mode screen appears.
2
Press the [Mode Memory] key.
The Recall Scan/Fax Program screen appears.
3
Touch the button for the program that is to be recalled.
– To continue without checking the settings registered with the selected program, continue with
step 7.
ineo+ 650/550/451
5
5-3