Develop ineo+ 451 User Manual page 435

Web Connection Operations
If "E-mail" was selected
Item
No.
Name
Index
Limiting Access to Destinations
E-mail Address
Registration of Certification In-
formation
If "FTP" was selected
Item
No.
Name
Index
Limiting Access to Destinations
Host Address
File Path
User ID
Password
anonymous
PASV Mode
Proxy
Port No.
ineo+ 650/550/451
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in
the number. If "0" is specified, the user box is automatically registered with the next
available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display the destination
in the touch panel, check the "Main" check box.
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the [Search from List]
button, and then select an access permission group from the list. If "Set direct Ref-
erence Allowed Level" is selected, select a level.
Type in the e-mail address of the destination (up to 320 characters).
Select this check box to register certificate information.
Select "Registration of Certification Information". Click the [Browse] button, and
then specify the certificate information. Only files in the DER (Distinguished Encod-
ing Rules) format are supported for certificate information.
To delete the certificate information, select "Deletion of Certification Information".
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in
the number. If "0" is specified, the user box is automatically registered with the next
available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display the destination
in the touch panel, check the "Main" check box.
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the [Search from List]
button, and then select an access permission group from the list. If "Set direct Ref-
erence Allowed Level" is selected, select a level.
Type in the IP address or host name for the FTP server to be used for transmitting
(up to 63 characters). To type in the host name, check the "Please check to enter
host name." check box. If the machine is set to use IPv6, an IPv6 address can also
be specified.
Type in the destination file path (up to 96 characters).
Type in the user ID (up to 47 characters).
Type in the password (up to 31 characters).
Select either "ON" or "OFF".
Select either "ON" or "OFF".
Select either "ON" or "OFF".
Type in the port number. (Range: 1 to 65535; Default: 21)
6
6-27