To Fold Copies In Three ("Tri-Fold" Setting) - Develop ineo+ 451 User Manual

2
3
Specify the settings for binding pages.
– To staple copies at the center in two places, touch [Yes] below "Center Staple" and [No] below
"Half-Fold".
– To bind copies at the center, touch [Yes] below "Center Staple" and [Yes] below "Half-Fold".
– If a cover sheet is added with the "Cover Sheet" function, the cover sheet (200 g/m
stapled.
– When the "Center Staple & Fold" setting is selected, the following factory default settings are
automatically selected.
1-Sided > 2-Sided
Booklet
Recommended zoom ratio (70.7%) when the "Booklet" function is selected
– When the "Center Staple & Fold" setting is selected, the following Finishing settings are not
available.
Group
Offset
Staple
Punch
– To cancel the "Center Staple & Fold" setting, touch [No] or the button for a different setting.
4
Touch [OK], and then touch [OK] again.

To fold copies in three ("Tri-Fold" setting)

When Finisher FS-608 is installed
Paper weight
2
64 g/m to 80 g/m
2
81 g/m to 90 g/m
Number of folded sheets
1 sheet
!
Detail
When copies are to be folded in three, settings can be specified to select whether the printed side is on
the inside or the outside.
2-66
Paper size
2
A4 w, 8-1/2 e 11 w, 16K w
2
Maximum number of tri-folded
sheets
3 sheets
1 sheet
Maximum number of sets
50 sets or more
Copy Operations
2
) cannot be
ineo+ 650/550/451