Develop ineo+ 451 User Manual page 497

Network Fax Operations (Option)
6
Specify the IP Address of the recipient.
– Address Book
Direct Input
Group destination
Program destination
– For details of procedure for specifying the IP address, refer to the "Specifying only one destination"
on page 8-14 and "Specifying multiple destinations (Broadcast transmission)" on page 8-19.
– Re-select the destination to be cancelled to cancel the selected destination.
– All entered numbers and selected settings are cleared on pressing [Reset] key.
– When [Manual Destination Input] is prohibited, [Direct Input] tab is not displayed.
– Touch [Color] on the IP Address Fax screen to send a color fax.
– IP Address of recipient can be easily specified on registering the IP Address of recipient to the
Address Book, Group destination, and Program destination.
Entered destination is displayed in the left panel of broadcast destination list.
7
Press [Start] key.
– When the Destination Check Display Function is set, the Destination Settings screen is displayed.
Confirm that the destination is correct and touch [Send].
– Press [Stop] key when the fax sending is aborted.
Scanning of the original begins, and the original is sent.
!
Detail
If the fax could not be sent, a TX Result Report is printed (when specified as to print the TX Result
Report).
ineo+ 650/550/451
8
8-9