Specifying The Basic Tab Settings (Pcl Driver For Windows); Printing To Suit The Paper Size - Develop ineo+ 451 User Manual

Print Operations
3.2

Specifying the basic tab settings (PCL driver for Windows)

Printing to suit the paper size

You can enlarge or reduce documents created when printing to match the output paper size.
1
Click the Basic tab.
2
From the "Original Size" and "Paper Size" drop-down lists, select the desired settings.
– You can also specify any enlargement or reduction ratio in the "Zoom" box.
Note
"12 × 18" paper size is one size larger than A3 paper size at 504.8 e 457.2 mm.
To print on paper sizes other than the standard sizes, be sure to set the custom paper sizes in Custom
Size Settings first.
When "W" is selected for each standard paper size from the printer driver, the data can be centered
and printed.
For example, if A4 size data is created and you want to center and print on A3 size paper, select "A4W"
as the paper size and "Tray 1" or "Bypass Tray" as the paper tray from the printer driver.
To print, load A3 size paper in the tray ("Tray 1" or "Bypass Tray") of this machine that was specified
from the printer driver, and then specify the settings described below from [Basic (Paper)] – [Change
Tray Settings] – [Wide Paper] in the control panel.
Select "A4W".
Enter the A3 paper size (420.0 e 297.0) in [Change Size].
ineo+ 650/550/451
3
3-7