Configure Tab; Settings Tab - Develop ineo+ 451 User Manual

3

Configure tab

Item
Device Option
Paper Tray Information
Acquire Device Information
Acquire Settings
Encrypt. Passphrase
Software Tools
Note
To display the Configure tab in Windows 2000/XP/Server 2003, right-click the icon of the installed
printer, and then click "Properties".
You cannot use the [Acquire Device Information] function if you are not connected to or able to
communicate with this machine.

Settings tab

Item
Display Constraint Message
Display paper set in Print Server Proper-
ties.
Verify Authentication settings before
printing
Popup Authentication Dialog when print-
ing
Note
To display the Settings tab in Windows 2000/XP/Server 2003, right-click the icon of the installed printer,
and then click "Properties".
3-36
Function
Specifies the status of the options that are installed on this machine and
the status of the user authentication and account track functions. Specify
the status of each item from the "Setting" drop-down list.
Shows the paper type specified for each tray. Click the [Paper Tray Set-
tings] button to specify the settings for each paper tray.
Communicates with this machine to read the status of the installed op-
tions.
Specifies the status of the connection that executes getting the option in-
formation.
Enters the encryption passphrase when it is user defined by communi-
cating with this machine.
Starts up software tools such as Web Connection.
Function
Displays a message when functions that cannot be specified at the same
time were enabled from the printer driver.
Uses the paper that was added in [Server Properties] of the printer folder.
Verifies the authentication settings for this machine before printing and
displays a message if the settings are not compatible.
Displays the User Authentication/Account Track dialog box when a print
job is specified to enter the user name and department name.
Print Operations
ineo+ 650/550/451