Table of Contents
Advertisement
Network Scanner Operations
5
Touch [Name], and then type in the registration name, using the keyboard that appears.
–
For details on typing in text, refer to "Entering text" on page 9-3.
6
Touch [OK].
7
Touch [Index], and then select the index characters.
8
Touch [OK].
9
Touch [Host Address], and then type in the IP address or host name.
–
To enter a host name, touch [Host Name Input], and then type in the host name, using the keyboard
that appears.
–
To enter an IP address, touch [IPv4 Address Input] or [IPv6 Address Input], and then type in the
address, using the keypad or the number buttons that appear. Touch
cursor to the desired position, and then type in the numbers.
–
When the input format is switched to entering an IP address after the host name was entered, the
host name is cleared.
–
If [Host Name Input] is touched after the IP address was entered, the entered IP address is saved
and the input screen appears.
–
When [Host Name Input] is touched, check that the DNS setting is correctly specified.
10
Touch [OK].
11
Touch [File Path], and then type in the file path, using the keyboard that appears.
12
Touch [OK].
13
Touch
New screen 2/2 appears.
14
Touch [User ID], and then type in the user ID, using the keyboard that appears.
–
To cancel registration of the user ID, touch [ON] beside "anonymous".
15
Touch [OK].
ineo+ 650/550/451
or
.
5
or
to move the
5-75
Advertisement
Table of Contents
Need help?
Do you have a question about the ineo+ 451 and is the answer not in the manual?
Questions and answers