Develop ineo+ 451 User Manual page 452

6
Item
Simplex/Duplex
Original Type
Separate Scan
Density
Background Removal
Scan Size
Application Setting
2-Sided Binding Direction
Special Original
Erase
Compose (Date/Time)
Compose (Page)
Compose (Header/Footer)
Compose (Stamp)
Stamp Combine Method
[Return to Defaults] button
6-44
Description
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Select the document quality, such as text or photo.
Select either "ON" or "OFF".
Select the density.
Adjust the density of the background.
Select the document size ("Auto" or "Standard Size").
If "Standard Size" is selected, select the size and the feed direction.
Click the [Display] button, and then specify settings for the functions that are
displayed.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long Original" as
the setting for the loaded document.
Select whether or not to enable frame erasing.
If "ON" is selected, specify the width that is erased on all sides of the document
("Top", "Bottom", "Left" and "Right").
Select whether or not to print the date/time.
If "ON" is selected, specify settings for the following.
• Date Type
• Time Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
Select whether or not to print the page number.
If "ON" is selected, specify settings for the following.
• Page Number (Range: -99999 to 99999)
• Chapter (Range: -100 to 100)
• Page Number Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Size
Select whether or not to print the header/footer.
If "ON" is selected, specify the registration number of the header/footer. To
check the registered header/foot, click the [Confirm Registed Contents] but-
ton.
Select whether or not to print the stamp.
If "ON" is selected, specify settings for the following.
• Preset Stamp or Registered Stamp
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
To check a registered stamp, click the [Confirm Registed Contents] button. A
registered stamp must first be registered from the control panel.
Select "Image" or "Text".
Click this button to reset the settings in the Application Setting page to their
defaults.
Web Connection Operations
ineo+ 650/550/451