Develop ineo+ 451 User Manual page 455

Web Connection Operations
Item
Density
Background Removal
Scan Size
Application Setting
E-mail Notification
Timer TX
Password TX
F-Code
Original Direction
2-Sided Binding Direction
Special Original
Book Scan
Erase
Compose (Date/Time)
Compose (Page)
Compose (Header/Footer)
Compose (Stamp)
Stamp Combine Method
[Return to Defaults] button
ineo+ 650/550/451
Description
Select the density.
Adjust the density of the background.
Select the document size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction.
If "Custom Size" is selected, specify the height and width.
Click the [Display] button, and then specify settings for the functions that are
displayed.
Select whether or not to enable e-mail notification.
If "ON" is selected, specify the destination address in the "Address" box. To
select a destination from a list, click the [Search from List] button.
Select whether or not to enable timer transmission.
If "ON" is selected, specify the time.
Select whether or not to enable password transmission.
If "ON" is selected, specify the password.
Select whether or not to enable F-codes.
If "Enabled" is selected, type in the SUB address and password.
Select the document orientation.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long Original" as
the setting for the loaded document.
Select whether or not to enable book scanning.
If "ON" is selected, select settings for the scanning method and center erasing.
If any setting other than "Book Spread" is selected for the scanning method,
select the binding position.
Select whether or not to enable frame erasing.
If "ON" is selected, specify the width that is erased on all sides of the document
("Top", "Bottom", "Left" and "Right").
Select whether or not to print the date/time.
If "ON" is selected, specify settings for the following.
• Date Type
• Time Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
Select whether or not to print the page number.
If "ON" is selected, specify settings for the following.
• Page Number (Range: -99999 to 99999)
• Chapter (Range: -100 to 100)
• Page Number Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Size
Select whether or not to print the header/footer.
If "ON" is selected, specify the registration number of the header/footer. To
check the registered header/foot, click the [Confirm Registed Contents] but-
ton.
Select whether or not to print the stamp.
If "ON" is selected, specify settings for the following.
• Preset Stamp or Registered Stamp
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
To check a registered stamp, click the [Confirm Registed Contents] button. A
registered stamp must first be registered from the control panel.
Select "Image" or "Text".
Click this button to reset the settings in the Application Setting page to their
defaults.
6
6-47