Loading Paper Into The Bypass Tray - Develop ineo+ 451 User Manual

2
2.9

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray if you wish to copy onto paper that is not loaded into a
paper tray, or if you wish to copy onto thick paper, postcards, envelopes, OHP transparencies or label sheets.
1
Open the bypass tray.
– When loading large-sized paper, pull out the tray
extension.
2
With the side to be printed on facing down, insert the paper as much as possible into the feed slot.
3
Slide the lateral guides to fit the size of paper being loaded.
How is curled paper loaded?
?
% Flatten the paper before loading it.
? How many sheets of paper and other media can be
loaded?
% Do not load so many sheets of plain paper that the top of
the stack is higher than the , mark.
4
Select the paper type.
2-22
Copy Operations
Tray extension
Lateral
guides
ineo+ 650/550/451