Copying With The Page Layout Of A Booklet ("Booklet" Function) - Develop ineo+ 451 User Manual

2
2.37

Copying with the page layout of a booklet ("Booklet" function)

The page order of the scanned document is automatically arranged to produce double-sided copies in a page
layout for center binding, such as for a magazine.
Stapling is possible only when the optional finisher or saddle stitcher on the finisher is installed.
!
Detail
Generally, a multiple of 4 document pages is required with a single-sided document, and a multiple of
2 document pages is required with a double-sided document. If there are not enough pages, blank
pages are automatically added at the end.
For details on stapling, refer to "Binding copies at the center ("Center Staple & Fold" setting)" on
page 2-63.
For a document that exceeds 100 pages, refer to "Scanning the document in separate batches
("Separate Scan" setting)" on page 2-28.
The width of the binding margin is automatically specified.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 2-26.
2
Touch [Application], and then touch [Booklet].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
2-134
"Left Bind" setting
"Right Bind" setting
Copy Operations
ineo+ 650/550/451