Develop ineo+ 451 User Manual page 152

2
3
Touch [Program Jobs], and then touch [OK].
4
Select the desired copy settings, and then press the [Start] key.
– To print a single copy to be checked, press the [Proof Copy] key.
Scanning begins.
5
Touch [Fix], and then touch [OK].
– If the document was loaded on the original glass, touch [Finish] in the screen that appears,
requesting confirmation that scanning is finished.
– If "Retry" was selected, touch [Change Setting] to change the copy settings.
6
Position the next document, and then touch [Change Setting].
2-114
Copy Operations
ineo+ 650/550/451