File System And Memory - Printronix T2N series User Manual

This section reviews the different features of Advanced Setup.

File System and Memory: Defines how memory is allocated within the system (see page 110).

Statistics Control: Allows the ability to reset certain statistics (see page 111).

Media/Sensor Control: Allows the ability to disable and enable sensors (see page 112).

Scalable Font Control: Allows the ability to modify the appearance of scalable fonts
(see page 112).

PGL Text Printing: Allows the ability to print text through PGL (see page 115).

File System and Memory

This section is used to determine how PCB, FLASH, and DRAM memory is divided between the file
system, page memory (memory allocated for the emulations to create images), and free memory
used by the emulations or system to process the job. To change these settings, select the value from
the drop down list and click the "Set" button to set the value. To reset all the settings in 'File System
and Memory', click the "Factory Set" button.
IMPORTANT: The printer must be reset for the settings to take effect. These values should
only be changed by knowledgeable users. If improperly configured, printer performance can
be adversely affected and possibly render the printer inoperable.
FLASH File System
Allows the user to select the amount of memory in KB to be allocated to the PCB Flash file system.
The choices are 1280, 2560, and 3840 KB.
The factory default is 2560 KB.
Max # of Files in FLASH
Allows the user to select the maximum number of files in FLASH to be allocated to the PCB Flash file
system. The choices are 128, 256, 384, and 512.
The factory default is 256.
DRAM File System
Allows the user to select the amount of memory in KB to be allocated to the DRAM file system. The
range is from 256 to 1024 KB in increments of 128 KB.
The factory default is 512 KB.
110