Setting Up The Printer - Printronix T2N series User Manual

LED Indicators
LED
POWER
ONLINE
STATUS
Special Power-Up Key Combinations
To simplify operation, a few functions can be performed by holding down certain keys at
power-up.
Key Combination
FEED Key
PAUSE Key
FEED + PAUSE Keys
Clearing Data from the Buffers
This product does not have a CLEAR key or method of clearing the data within the internal
buffers. Turn the printer off/on to clear the buffer.

Setting Up the Printer

1. Place the printer on a flat, secure surface.
2. Ensure the power switch is off.
3. Plug the power cord into the AC power cord socket at the rear of the printer, then plug the power cord
into a properly grounded power outlet.
4. Connect the printer to the computer interface with the appropriate cable.
State Indication
Off Printer power is turned off.
On Printer power is turned on.
Off Printer is offline or error occurred.
On Printer is online.
Blinking Printer is receiving data.
Off Printer is offline.
On Printer is online.
Printer is in error state:
Blinking Head Open, Paper Jam, Out of Paper, Ribbon Errors,
Cutter Error, Printhead Overheat, Calibration Error
Function
Printer will power-up and print a test page.
Printer will power-up and by default, force Auto-Calibration
regardless of the configuration option. (See Chapter 5,
Media/Sensor tab on page 69).
Printer will reset to its factory default parameters.
19