Rtc Setup (Real-Time Clock); Show Configuration - Printronix T2N series User Manual

RTC Setup (Real-Time Clock)

T2N printers include a Real-Time Clock (RTC) that can be set by the user and used from within the
applications (depending on the emulation's capability to use RTC).
The procedure to set the current time is as follows:
1. Click the "RTC Setup" button under Printer Function. The values shown in the fields will be
the current clock setting in the printer. See step 1 in Figure 26.
2. Click "Get System Time". This will populate the fields based on the current time of the PC
running the Configuration Utility. See step 2 in Figure 26.
Step #1
3. Change each field to the time and date desired.
4. Click "Set" to set the clock in the Printer. The RTC Setup window closes.
5. Click RTC Setup to verify the correct Printer RTC Setting.

Show Configuration

The "Show Configuration" function in the Printer Function section is useful for storing a complete
record of the current configuration parameters loaded in the Configuration Utility. When the Show
Configuration button is clicked, the Windows Notepad application launches with a file named
"Config.txt". This file contains the entire configuration, including:

The time at which the configuration was stored.

Printer configuration section with the printer version, serial number, and other statistics.

Each printer configuration tab, including Media/Sensor, Interface, PGL, ZGL, and EGL.

Advanced Tab settings.
Note: To guarantee this information is consistent with the printer configuration, perform a "Read"
operation before the "Show Configuration" operation.
98
Figure 26. Real Time Clock Setup
Step #2