Printer Information - Printronix T2N series User Manual


Printer Configuration Tabs. This subsection allows users to set up and store a configuration in
the T2N printer. The available tabs for configuration include:
Tab
Media/Sensor
Interface
PGL
ZGL
EGL

Printer Functions. This subsection consists of a set of buttons used to perform setup actions
(e.g., Calibrate Sensor and Active Emulation), diagnostics, and other important features such as
firmware upgrade. See Printer Functions on page 93 for more details.

Printer Status. This subsection queries the printer regarding status (e.g., Ready, Head Open,
Paper Jam, Out of Paper, etc.). See Printer Status on page 102 for more details.

Printer Information

Figure 11 shows printer information. Upon clicking the "Read" button, the printer's information
populates the Configuration Utility. All items shown are read-only and cannot be modified. This
section describes the fields in greater detail.
IMPORTANT: If you contact the Printronix Auto ID Customer Support Center for technical
support, report these field values for prompt handling.
Version
The Version consists of the model name, program file version, program file date, and program file
part number. The model name is T2N2 = 203 DPI, T2N3 = 300 DPI. The program file version is in
Printronix format Vm.xxYY. See Version Number on page 56 for information on Vm.xxYY format.
Note: When contacting the Customer Support Center, use the program file part number to
identify the software.
Serial No.
Serial No. is the serial number of the printer set in the Factory.
DPI
The printer DPI value (203 or 300 DPI) displays in this field.
62
Description
Configures all label and sensor settings.
Configures the host I/O, including serial and Ethernet.
Configures PGL settings.
Configures ZGL settings.
Configures EGL settings.
Figure 11. Printer Information Values