Firmware Upgrade - Printronix T2N series User Manual

Firmware Upgrade

Conveniently upgrade the printer firmware by clicking the "Firmware Upgrade" button and locating the
desired program file (.NEW extension) as shown in Figure 31.
If the printer firmware has a different extension, click the "Files of Type" down arrow and select "*.*".
Upon a firmware upgrade, the following will occur:

The User Configuration is erased and reset to the factory default according to the new
firmware.

All files stored in PCB flash remains in the system.
IMPORTANT: The upgrade process takes several minutes. During upgrade, the printer cannot
inform the Configuration Utility of its progress. It is recommended to allow the Configuration
Utility and printer to complete the process without interruption for at least five minutes once
the process has started. After the printer is back online, the user may again connect with the
printer and proceed.
102
Program File Extension
Figure 31. Firmware Upgrade Procedure