Usb Setup; Serial Rs-232 Setup - Printronix T2N series User Manual

USB Setup

There is no setup for USB. Simply connect the USB cable between the printer and host, and
the printer is ready to receive data.

Serial RS-232 Setup

Baud Rate
Sets the baud rate of the serial interface in the printer. Baud rate is the speed at which serial data
is transferred between the host computer and the printer. Options for the RS-232 interface are
1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 Baud.
The factory default is 9600.
Data Bits
Sets the length of the serial data word. The length of the data word can be set to 7 or 8 bits and
must match the corresponding data bits setting in the host computer.
The factory default is 8.
Parity
The options are Odd, Even, or None. The setting must match the corresponding parity setting in
the host computer.
The factory default is None.
Stop Bit(s)
Sets the number of stop bits in the serial data word. Either 1 or 2 stop bits can be selected. The
setting must match the corresponding stop bit setting in the host computer.
The factory default is 1.
76