Print Test Page - Printronix T2N series User Manual

Saving this file allows administrators to review and store the configuration as a receipt once the setup
procedures are completed. Another benefit is that this file can be sent to the Printronix Auto ID
Customer Support center upon request if there is a problem.

Print Test Page

The "Print Test Page" button in the Printer Function section forces the printer to print a test page that
consists of a grey print test pattern followed by the current configuration. The configuration format is
the same as shown with the "Show Configuration" option.
001 T2N Configuration
002 VERSION
003 SERIAL NUMBER
004 DPI
005 PRINTER USAGE
006 PRINTHEAD USAGE
007 CUT COUNT
008 FLASH
009 DRAM
010 MEDIA/SENSOR
011 Print Speed
012 Print Intensity
013 Media Handling
014 Print Mode
015 Label Width
Alternatively, the test page can be printed by rebooting the printer while holding the FEED key on the
control panel.
Figure 27. Show Configuration
(7/2/12 5:03pm)
V1.11D 23-Jun-12 #372123
3T2N21235093
203
1923442 inches
574391 inches
455
8 MB
32 MB
4 IPS
-3
Continuous
Direct
3.9 inch
Figure 28. Test Page
99