Printronix T2N series User Manual page 53

5. Push the deck lock lever to release the pivoting deck.
6. Carefully disconnect the printhead cable assembly from the printhead by pulling out the
connector.
IMPORTANT: Do not pull on the cables.
Printhead
Connector
Printhead
Assembly
7. Replace the printhead assembly.
8. Connect the printhead cable and carefully lift the assembly into the pivoting deck.
9. Align the printhead assembly holes with the tenons, then insert.
IMPORTANT: Push the cables back underneath pivoting deck cover. Do not block the
ribbon path, otherwise the ribbon could bulge and cause wrinkles.
Cables
Printhead
Assembly
Tenons
Printhead
Assembly
Holes
53