Mp2 Rfid; Coupler System - Printronix SL4M Reference Manual

3

MP2 RFID

Coupler System

The MP2 RFID has a coupler design that supports a greater variety
of tag types. You can move the MP2 coupler horizontally by using
the coupler handle. See figures on page 94 and page 96.
The coupler has four positions on a four inch printer and five
positions on a six inch printer. The possible positions moving from
inboard (nearest the electronic bay) to outboard (nearest the
window) are as follows:
Yellow: 1st Position (furthest inboard)
Orange: 2nd Position
Red: 3rd Position
Blue: 4th Position (furthest outboard on a 4 inch printer)
Green: 5th Position (this uses a second coupler position indicator
available on six inch printers only)
Once you select a tag type from the front panel, the following
message will display:
SL5000r
Ant Pos x
(where x is Yellow, Orange, Red, Blue, or Green)
SL4M
Set Antenna Pos
to x
↵
If Done Press
(where x is Yellow, Orange, Red, Blue, or Green)
93