Tool Interface - Printronix T2N series User Manual

Figure 8. Changing System Locale
After proper configuration, the language selected becomes the default language when the
Configuration Utility is launched.

Tool Interface

Tool Interface selection is available as a drop-down menu in the upper-right corner. This option
allows you to choose communication I/O options with the printer: USB (the default), COM, or
ETHERNET. If the printer is connected to a PC with USB interface, launching the application will
automatically read the configuration settings from the printer and populate the fields. This
interface selection may be different from the interface sending print jobs. For example, a user
may want to select USB or COM with a laptop to configure the Ethernet parameters for a live
application environment. Alternatively, the user may prefer USB for both the Tool Interface and
the live application.
Figure 9 shows the Tool Interface section with the "Setup" window open to configure the selected
I/O. When USB is selected, no setup is required. For the COM (RS-232 serial), see Figure 9 for
setup options. If ETHERNET is selected, no setup is required but Ethernet setup within the
Interface Tab must be configured. Once the Tool Interface type is selected and setup is complete,
the Configuration Utility is ready to use.
Figure 9. Tool Interface Setup
59