Installing The Application; Launching The Application; Version Number - Printronix T2N series User Manual

Installing the Application

The Configuration Utility is contained in a zip file as part number.zip. The zip file will contain four
elements:
1. Configuration Utility file (.exe)
2. Compiled Help files (T2NHelp.chm)
3. PDF file (T2NHelp.pdf)
4. Readme file (.txt).
Installation is not necessary. Simply extract the contents of the zip file into the desired directory or
location then launch the application .exe file.
IMPORTANT: Extract contents of the zip file into the local C directory of your laptop or PC to have
access to the automated HELP contents within the Configuration Utility.
The application name follows the format ConfigUtil_vm_xxY.exe where vm_xxY represents the version
number of Vm.xxY as described in the Version Number section (see below). The included version number
allows the user to have several different versions of the Configuration Utility.
The T2N Configuration Utility can be launched with the icon
application. The icon is Copyright © 2013 Printronix Auto ID Technology, Inc. All Rights Reserved.

Launching the Application

Double-click the icon or execute ConfigUtil_vm_xxY.exe from a Windows command prompt.
The application will open as shown in Utility Overview (page 57).

Version Number

The Configuration Utility's functionality and configuration change in conjunction with the firmware. Each
Configuration Utility release has a version number with format: Vm.xxYY where:

V = version

m = main version level (used to identify major updates)

xx = compatibility level (version for compatibility level)

YY = A-Z, AA-ZZ
The T2N firmware will also have a similar version number format. The rules and limitations regarding
interaction between different firmware and Configuration Utility versions are discussed in the Compatibility
Challenges section (see page 66).
56
(letter for minor updates)
which is copyrighted for use with this