Test Selection; Test Count; Printhead Test; Print Statistics - Printronix T3306 Setup Manual

Test Selection

This menu item is used to select the type of pattern to be used for the test
printout.

Test Count

This menu item is used to select the number of pages for the test printout. You
may select 1, 2, 5 or 10 pages, or a continuous number of pages. The default is
one page.
Start Test
Press the

Printhead Test

This option is used to define and activate a printhead test. You must enable the
test selection and specify the test period.

Print Statistics

This option provides access to miscellaneous items that provide information
about printer usage.

Printer Life

This menu item displays the total number of meters printed (normalized to 300
dpi).

Head Life

This menu item displays the total number of meters printed (normalized to 300
dpi) for the printhead. Use the Reset Head Data menu item when you replace the
printhead.

System Memory

This menu provides information about system memory configuration.
Total RAM – Total RAM in printer
Firmware Rev – Firmware revision
3–42
key to start and stop diagnostic test printing.
Configuring the Printer